Quartzite through the crusher is widely used in the production of quartz sand glass with silicone grease, foundry, steel pipe, tube tank cleaning, water filtration, refractories, ceramics chemical, cement and other industries. Since quartz sand silica content is very high, the crusher wear parts loss is very large, so in the production process of quartz sand, crusher production line process selection is very important!

Traditional quartz sand crusher production line adopts china jaw crusher and hammer crusher, hammer crusher hammer directly shattered quartz sand used way of working, quartzite hammer wear high hardness for very serious, usually four hours for a hammer and hammer head wear out iron entering into the quartz sand, causing the material iron exceeded. YIFAN configured for the customer when the production of 40 tons of quartz sand production line, not only yield, and stable performance. The process is: Belt conveyor hopper → → two PE250 × 1200 crusher → sand maker → → Bucket circular vibrating screen, sand washing machine → HX22-sand recycling machine, configure three iron tools: magnetic → in magnetic → weakening. Used jaw crusher and sand maker models, two fine jaw crusher discharge adjusted to 5 cm below into sand maker, sand maker uses YIFAN original rock stone works, quartz sand material entering the crusher, the rotor in the sand maker high-speed rotation, the flow of material to form a waterfall left, forming material impact materials work, to reduce the impact of quartz sand and liner to reduce the loss of wear parts, reducing the iron content in quartz sand.

After Huahong quartz sand production line crusher → screening → → washing → calcined magnetic series of processes, got 4-270 purpose of eight kinds of graded quartz sand, iron and other impurities less than ten thousandths, in full compliance with quartz sand , refractories and other industries.